Softmii 半成品 2.9.5 和 CIOS36 rev11 发布
很可惜，Skarface 木有及时完成3.0的版本，不过他暂时放出了2.9.5版本，他会在明天放出3.0的升级包。安装前提：
1 WII主机不能插有GC手柄和记忆卡
2 PAL或NTSC-U主机，3.4系 统或者以前版本，但支持Waninkoko的Firmware update 4.0升级的4.0系 统
3 至少128M大小的SD卡，FAT或FAT32格式
4 Zelda传说：黄昏公主游戏一张
5 WIFI连接
安装完毕后：
1 破解并打开漏洞的3.2系 统
2 美化自制菜单
3 直读频道WII游戏全区
4 直读频道GC游戏全区
5 存档复制
6 屏蔽升级
7 去除002错误
8 背景音乐去除
9 Preloader0.29
10 Waninkoko's 没有放出过的 cIOS36rev11
11 HBC 1.01
12 频道全区
13 可升级到4.0系 统
详解这个半成品的安装方式，请按步骤来（4.0U下安装）：
1 Cios
就是Cios36REV11的安装，唯一不同的是，已经不再使用v1042版本了，这次使用了最新的版本v3094，离线WAD Install的请将IOS36-64-v3094.wad放在SD卡根目录
2 cIOSCORP
同样的21个固件，4.0U下安装小心，事先请安装Preloader0.29先，否则。。。全砖。
安装后，会出现全砖，重启按住RESET，进入Prelaoder的HBC，重新安装一遍Preloader0.29即可。
3 Cmios
是GC的支持固件，不过还是Waninkoko的REV3，支持并不好，还是建议用WIIGATE的XI 0.2
4 SoftMii IOS Downgrader
可从4.0降级固件IOS16并打开漏洞，需WIFI，这个应该是降级官方3.4或者以上系 统用的，待测 试
5 SoftMii Firmware Downgrader
可从4.0降级所有相关固件（主要是IOS60和Systemenu），貌似这个和Firmware Update 4.0配套的，一个升级一个降级用，需WIFI
http://d01.megashares.com/dl/b1b083c/softmii_2.9.5.zip
http://www.megaupload.com/?d=ZHGKH7GZ
http://rapidshare.com/files/225779108/softmii_2.9.5.zip
官方链接: 官方链接
本地下 载
kavid:
____ __ _ ____ _ _
/ ___|___/ _| |_|\/(_|_)
\___ \ / _ \| |_| __| |\/| | | |
___) | (_) |_| |_| || | | |
|____/ \___/|_|\__|_||_|_|_|
http://SoftMii.org
#SoftMii EFNet
中文：
安装前提：
1 WII主机不能插有GC手柄和记忆卡
2 PAL或NTSC-U主机，3.4系 统或者以前版本，但支持Waninkoko的Firmware update 4.0升级的4.0系 统
3 至少128M大小的SD卡，FAT或FAT32格式
4 Zelda传说：黄昏公主游戏一张
5 WIFI连接
安装完毕后：
1 破解并打开漏洞的3.2系 统
2 美化自制菜单
3 直读频道WII游戏全区
4 直读频道GC游戏全区
5 存档复制
6 屏蔽升级
7 去除002错误
8 背景音乐去除
9 Preloader0.29
10 Waninkoko's 没有放出过的 cIOS36rev11
11 HBC 1.01
12 频道全区
13 可升级到4.0系 统
详解这个半成品的安装方式，请按步骤来（4.0U下安装）：
1 Cios
就是Cios36REV11的安装，唯一不同的是，已经不再使用v1042版本了，这次使用了最新的版本v3094，离线WAD Install的请将IOS36-64-v3094.wad放在SD卡根目录
2 cIOSCORP
同样的21个固件，4.0U下安装小心，事先请安装Preloader0.29先，否则。。。全砖。
安装后，会出现全砖，重启按住RESET，进入Prelaoder的HBC，重新安装一遍Preloader0.29即可。
3 Cmios
是GC的支持固件，不过还是Waninkoko的REV3，支持并不好，还是建议用WIIGATE的XI 0.2
4 SoftMii IOS Downgrader
可从4.0降级固件IOS16并打开漏洞，需WIFI，这个应该是降级官方3.4或者以上系 统用的，待测 试
5 SoftMii Firmware Downgrader
可从4.0降级所有相关固件（主要是IOS60和Systemenu），貌似这个和Firmware Update 4.0配套的，一个升级一个降级用，需WIFI
注意：在开始之前请通读安装手册。手册主要分两个主要部分，如果你不明白如何操作，Softmii 小组建议从头开始。
英文：
Brought to you by Team SoftMii: DigityDogs, Jizmo, MonkeyJam and Skarface05
Requirements:
- No GC hardware (controllers, save cards) plugged in.
- PAL or NTSC-U Wii on System Menu 3.4 or older (System Menu 4.0 supported if you upgraded with Waninkoko's updater).
- SD Card (at least 128mb, max 2gb), formatted to FAT or FAT32.
- The SoftMii 3.0 pack, with the "SD Card" folder's contents placed on your SD card.
- The Wii game "Legend of Zelda: Twilight Princess".
- Wii connected to internet via Wi-Fi.
With SoftMii, you get:
- Customized and hacked System Menu 3.2
- System Menu theming, themes available at SoftMii.org
- Full Disc Channel region-free backup loading
- GameCube Backups via Disc Channel
- No Copy Save Protections Removed
- Skip game updates
- No Error 002 in new games like NFS: Undercover
- No System Menu background music if desired
- Preloader 0.29 Installation
- Waninkoko's previously-unreleased cIOS rev11
- Move your Disc Channel anywhere
- Homebrew Channel 1.01 installation
- Region Free Channels
- Supports any Wii up to System Menu version 4.0(with HBC)!
Note: Please read through all steps at least twice before beginning. The guide is split into two main phases, the SoftMii team suggests starting at the first one unless you know better.
_ _ _ ___ _ _ _
| | | | ____ __ ___ ___| |___ __ _____ __ |_ _|_ _____| |_ __ _| | |
| |_| |/ _ \| '_ ` _ \ / _ \ '_ \| '__/ _ \ \ /\ / /| || '_ \/ __| __/ _` | | |
|_| (_) | | | | | |__/ |_) | | |__/\ VV / | || | | \__ \ || (_| | | |
|_| |_|\___/|_| |_| |_|\___|_.__/|_|\___| \_/\_/ |___|_| |_|___/\__\__,_|_|_|
中文:
这段是关于Homebrew Channel 的安装见：//thread-5943-1-1.html
英文：
IMPORTANT NOTICE: If your Wii's serial number (found on the bottom of the console) starts with "LU64", you cannot install the standard SoftMii package. Instead, use the section called LU64 after the SoftMii section to install what you can (installing the main guide on LU64 WILL BRICK YOU).
1) First, we need to identify your System Menu version and region. To get the version, go to Wii Settings on your Wii and look in the upper-right of the screen. Make note of this number and will be displayed in the top right corner of the screen. If your version is 3.3 or below, contine to step two. If it is over 3.4, you need to wait a while until a new exploit is released. If you are on 3.4, extract the "Twilight Hack 3.4.zip" to the root of your SD card, overwriting any files you are asked about.
To get your Wii's region, we need to know what country your Wii is from. The key is as follows:
- USA: NTSC-U (commonly refered to as just NTSC)
- Europe/Australia: PAL
- Japan: NTSC-J. SoftMii may or may not work on Japanese consoles.
2) If you have never played Legend of Zelda: Twilight Princess on this Wii, you will need to play it once and create a save file. If you have already played it and want to keep your current save file, you must back up your save to SD card and transfer it to the computer before attempting SoftMii installation. The Twilight Hack overwrites any save stored on the SD card, so be careful.
3) After ensuring you have a save created/backed up, go Options in the Wii Menu, then Data Management, then Save Data, then Wii. Make sure that "Wii" is selected as what you are viewing, then click on the Twilight Princess save and select erase. After it is erased, select SD from the upper right hand tab. select the Twilight Hack with your region's name under it. Select copy. After it has copied you may return the to System Menu's channel selection screen and do the next step ASAP.
4) Start Zelda regularly. When you get to the Save Data selection screen, select Twilight Hack or Twilight Hack0, whichever shows up on your Wii. When the game starts, walk forwards, and talk to the man standing in front of you. The Wii will then crash. If no black box comes up, restart this step but select Twilight Hack2, otherwise continue on. If it gives an error, you are going to need to restart this guide with a new SD card, as some SD cards simply do not work.
5) The Homebrew Channel 1.01 installer will begin, and you should answer yes to all the prompts. Your system will restart with the Homebrew Channel (HBC) installed.
IMPORTANT NOTICE: If your Wii's serial number (found on the bottom of the console) starts with "LU64", you cannot install the standard SoftMii package. Instead, use the section called LU64 after the SoftMii section to install what you can (installing the main guide on LU64 WILL BRICK YOU).
____ __ _ ____ _ _ ___ _ _ _
/ ___|___/ _| |_|\/(_|_)|_ _|_ _____| |_ __ _| | |
\___ \ / _ \| |_| __| |\/| | | | | || '_ \/ __| __/ _` | | |
___) | (_) |_| |_| || | | | | || | | \__ \ || (_| | | |
|____/ \___/|_|\__|_||_|_|_||___|_| |_|___/\__\__,_|_|_|
中文：
严重注意：如果你的Wii序列号是“LU64”开始的，你不能安装标准Softmii包。而是使用LU64的部分，安装Softmii这个部分后，才能进行其他安装。（如果按照标准安装会LU64的主机变砖）
1）进入Homebrew Channel（简称：HBC）选择"SoftMii Preinstaller"，选择"Install Me"按A，完成后按Home 键退出。注意：忽视"LU64 Fix"!如果想要安装USB Loader在这部你可以选择安装。
2）返回HBC，运行cIOS installer并且同意警告。用十字键选择“"Network Install"按A就开始安装了。
离线的“Wad install”则需要下 载：//viewthread.php?tid=12048
IOS36-64-v3094.wad 放到sd卡根目录，然后按A即可。
3）返回HBC并且运行 "SoftMii IOS Downgrader"。如果碰到失败，这是正常的，只需要在完成后，再运行一次即可。
4）返回HBC，选择 "SoftMii Firmware Downgrader"。在程序里面选择来安装一个版本的系 统菜单并且等待完成，重新启动wii
5）运行HBC选择"cIOSCORP"安装Disc Channel Backup Loading.
安装程序可能会有点卡，但是程序确实在工作中。
6）HBC中，选择"Preloader 0.29"。阅读警告并且按1安装。安装后，你的wii重新启动并且读取Preloader菜单。如果没有成功，关闭机器，按住Reset开机。警告 ：如果你在安装了Preloader后安装了一个新的IOS60，你必须再次安装Preloader，以避免错误信息和一个没有功能的菜单。
你将需要根据你的wii区改名适合的hack文件，命名为hack.ini放到sd卡根目录，然后你才能运行Preloader进行破解安装。
7）在Preloader菜单里面，选择"System Hacks"并且把所有你喜欢的hacks变成enable。必选"Skip Disc Update"（封锁从光盘频道玩游戏的升级）。选择"Save Settings" 然后等待确认信息直到下是 "Settings Saved"。按B返回，然后进入Settings。设置“Autoboot: System Menu”（用手柄十字键），然后保存，按B返回Preloader主菜单。
8）退出重新启动，现在就完成了Softmii安装。
英文：
IMPORTANT NOTICE: If your Wii's serial number (found on the bottom of the console) starts with "LU64", you cannot install the standard SoftMii package. Instead, use the section called LU64 after the SoftMii section to install what you can (installing the main guide on LU64 WILL BRICK YOU).
1) Start the Homebrew Channel, and select "SoftMii Preinstaller" from the list of programs. Select "Install Me" and press A, then when that finishes, press the Home button to exit. IGNORE "LU64 Fix"! You can also install the USB Loader at this point if you wish (see USB Loader section below).
2) Back in the Homebrew Channel, launch cIOS Installer and accept the warning. Choose "Network Install" with the D-Pad, and this will download and install cIOS rev 11.
3) Return to Homebrew Channel and run "SoftMii IOS Downgrader". If some things fail, this is normal, simply run the program again until all of them succeed.
4) From Homebrew Channel, select "SoftMii Firmware Downgrader". Once you are in the program, select an System Menu version to install. The SoftMii Team suggests either System Menu 4.0 or System Menu 3.2. Then install that version, and when it is finished, reboot your Wii.
5) Run the Homebrew Channel, and select "cIOSCORP" to install Disc Channel Backup loading. The insatller may freeze for a bit, but it will eventually work.
6) From the Homebrew Channel, load "Preloader 0.29". Read the warning and press 1 to install. After install, your Wii should reboot and load the Preloader menu. If it does not, power your Wii down and then turn it back on. As soon as you press power to turn it back on, hold down reset to load the Preloader menu. WARNING: If you install a new IOS 60 after installing Preloader, you need to re-install Preloader to avoid an error message and a non-functioning System Menu.
You will need to rename the appropriate hacks file for your region in the pack to hacks.ini and then place it on the root of sd card, then you can proceed with this install.
7) Select "System Hacks" in the Preloader menu, and enable all the hacks you would like. "Skip Disc Update" is required for proper backup loading from disc channel. Select "Save Settings" and wait for confirmation message to display "Settings Saved". Press B to go back, and enter Settings. Set "Autoboot: System Menu" (using the D-Pad Arrows), then select save settings. Press B to return to main Preloader menu.
8) Exit and reboot. You have now installed SoftMii!
_ _ ___ __ _____ _
| || | | |/ /_ | || | |___(_)___
| || | | | '_ \| || |_| |_| \ \/ /
| |__| |_| | (_) |__ _| |_| | |><
|_____\___/ \___/ |_| |_| |_/_/\_\
LU64主机的修复
1）进入HBC，选择"SoftMii Preinstaller" ，"Install Me"按A当完成的时候，按A安装"LU64 Fix"!。如果想要安装USB Loader在这部你可以选择安装。
2）返回HBC，运行cIOS installer并且同意警告。用十字键选择“"Network Install"按A就开始安装了。离线的“Wad install”则需要下 载：//viewthread.php?tid=12048，IOS36-64-v3094.wad 放到sd卡根目录，然后按A即可。
3）我们建议在这步用这个程序而不是使用cIOScrop直到明我们发布3.0里面的新的cIOScrop安装程序。你现在能够使用usb loader了并且所有自制程序。请删除下部分的一个可选的。
在你安装preloadre前，preloader不支持3.4系 统，你现在需要用SoftMii Firmware Downgrader更新的4.0系 统。所以如果想要安装preloader-请使用 SoftMii Firmware Downgrader并升级到4.0 - 绝对不会降级.This would = a full brick for now
4）HBC中，选择"Preloader 0.29"。阅读警告并且按1安装。安装后，你的wii重新启动并且读取Preloader菜单。如果没有成功，关闭机器，按住Reset开机。警告 ：如果你在安装了Preloader后安装了一个新的IOS60，你必须再次安装Preloader，以避免错误信息和一个没有功能的菜单。
你将需要根据你的wii区改名适合的hack文件，命名为hack.ini放到sd卡根目录，然后你才能运行Preloader进行破解安装。
5）在Preloader菜单里面，选择"System Hacks"并且把所有你喜欢的hacks变成enable。必选"Skip Disc Update"（封锁从光盘频道玩游戏的升级）。选择"Save Settings" 然后等待确认信息直到下是 "Settings Saved"。按B返回，然后进入Settings。设置“Autoboot: System Menu”（用手柄十字键），然后保存，按B返回Preloader主菜单。
6）退出重新启动，现在就完成了Softmii安装。现在就在你的LU64上装softmii了！警告：不要试图降级LU64系 统。你将最终得到一个无用的设备。
1) Start the Homebrew Channel, and select "SoftMii Preinstaller" from the list of programs. Select "Install Me" and press A, then when that finishes, press A to install "LU64 Fix"! You can also install the USB Loader at this point if you wish (see USB Loader section below).
2) Back in the Homebrew Channel, launch cIOS Installer and accept the warning. Choose "Network Install" with the D-Pad, and this will download and install cIOS rev 11.
3) We reccomend that you use a loader at this point rather than use
cioscorp until we release the new cIOSCORP Installer tomorrow in 3.0
You are now able to use usb loaders and all homebrew again.Please rememver the next steps are optional.
You Would now need to use SoftMii Firmware Downgrader to Upgrade to 4.0 before you could install preloader as preloader DOES NOT work on 3.4.So please if you wish to proceed with installing preloader - use SoftMii Firmware Downgrader and upgrade to 4.0 - NEVER DOWNGRADE.This would = a full brick for now
4) From the Homebrew Channel, load "Preloader 0.29". Read the warning and press 1 to install. After install, your Wii should reboot and load the Preloader menu. If it does not, power your Wii down and then turn it back on. As soon as you press power to turn it back on, hold down reset to load the Preloader menu. WARNING: If you install a new IOS 60 after installing Preloader, you need to re-install Preloader to avoid an error message and a non-functioning System Menu.
You will need to rename the appropriate hacks file for your region in the pack to hacks.ini and then place it on the root of sd card, then you can proceed with this install.
5) Select "System Hacks" in the Preloader menu, and enable all the hacks you would like. "Skip Disc Update" is required for proper backup loading from disc channel.Select "Save Settings" and wait for confirmation message to display "Settings Saved". Press B to go back, and enter Settings. Set "Autoboot: System Menu" (using the D-Pad Arrows), then select save settings. Press B to return to main Preloader menu.
6) Exit and reboot. You have now installed SoftMii for LU64! WARNING: Do not attempt to downgrade a LU64 system. You will only end up with a useless device.
___ _ _ _ _____
/ _ \ _ __ | |_(_) ____ __ __ _| |/ ___|| |_ ___ _ _____
| | | | '_ \| __| |/ _ \| '_ \ / _` | |\___ \| __/ _ \ '_ \/ __|
| |_| | |_) | |_| | (_) | | | | (_| | | ___) | ||__/ |_) \__ \
\___/| .__/ \__|_|\___/|_| |_|\__,_|_||____/ \__\___| .__/|___/
|_| |_|
___ __ ____ __ _ __ ____
||__| |___ |\/| | |\ | | __
||| |___ || | | \| |__]
中文：可选步骤，主题
1，去SoftMii.org现在主题。针对你的区选择。
1) Goto SoftMii.org and download any theme you might like for your Wii, but make sure it is for your System Menu version and for your region. If it comes as a .mym file, skip to step 3. Otherwise, continue on.
2) For 000000XX.app files, they need to be in the correct format for your version and region. The chart is as follows:
- 00000042.app = NTSC-U 3.2
- 00000045.app = PAL 3.2
- 00000072.app = NTSC-U 4.0
- 00000075.app = PAL 4.0
Skip to step 4.
3) For a .mym file, you need the PC application MyMenu, which comes with the SoftMii package. Install this application. When it is done installing, run it. For the "MyScript File", select the .mym file you downloaded. For the "Source", select the standard .app file (unmodified) for your System Menu version and region, you can get this from many different sources. Press go to start the process, and save the resulting file on your computer.
4) Copy the file (either downloaded or created) to the /softmii/ folder on your SD card, and name it ANYTHING you want to. Launch the Homebrew Channel, and load SoftMii Tweaks. Select the file that you placed on your SD card, and press A to install. Once it has installed, press Home to reboot your Wii and see it themed!
____ ____ __ ____ ____ __ _______ _ ____ ____ ____ __ ____
| __ |__| |\/| |___ | || |__] |___ | || |__| |\ | |\ | | __
|__] || || |___ |___ |__| |__] |___ |___ |__| || |__/ | | \| |__]
1) Load the Homebrew Channel, and load "cMIOS Installer". Select Network Installation, and start the installation. When it is finished, exit, and reboot your Wii.
__ ____ ___ _ ____ ____ _______ ____
|| | || |__| |\ |___ |__/
|__| ___] |__] |___ |__| || |__/ |___ |\
1) Load "SoftMii Preinsatller", and select "USB Loader". Press A to install. After it installs, press Home to exit, and reboot your Wii. You will see a new "USB Loader" channel.
_____ _ _
|_ _| |__ __ _ _ __ | | _____
| | | '_ \ / _` | '_ \| |/ / __|
| | | | | | (_| | | | | <\__ \
|_| |_| |_|\__,_|_| |_|_|\_\___/
Thanks go out to the following people:
- Our fantastic and very patient web design team: Stealthii, m4Aark, and Kyros.
- Our coders: icefire, ether2802, and Waninkoko.kitt,linknworm,wiigator,kwiirk,and many many more.
- Our testers, helpers, and WiiBlaster, NoobWarrior07, linkinworm, WiiCrazy, Wiisel, Mrkinator, Arm The Homeless, IronMask, DJTaz, DJDynamite123, WiiPower, Emperor of Canada, Alejandroues, NeoRame, WiiShizzza, Jacol Beyros.
[ 本帖最后由 JaySun 于 2009-4-26 14:43 编辑 ] 坐沙发！~{强唉} 好东西啊 路过``以后用里面的IOS{私奔} {私奔} cIOS36rev11出了{加油加油}
我已经装了MIIWII，不知道等成品的Softmii出了是换成Softmii还是继续用MIIWII{不懂呢} 总算等到了，装了以前版本的要怎么升级啊{呆呆的} Zelda传说：黄昏公主游戏一张 这个不是要正版吧？ 好啊 不错 只升级ios 等3.0前适用看看 原帖由 JaySun 于 2009-4-26 10:05 发表 //images/common/back.gif
很可惜，Skarface 木有及时完成3.0的版本，不过他暂时放出了2.9.5版本，他会在明天放出3.0的升级包。
安装前提：
1 WII主机不能插有GC手柄和记忆卡
2 PAL或NTSC-U主机，3.4系统或者以前版本，但支持Waninkoko的Fi ...
cIOS249rev11 的好处就是能装在 3.4v2 的机器上。之后，就能用 BKL, softchip 等了。softmii 3.0 靠这吃香。。嘻嘻！{没话说} 还要塞尔达啊？ 老版本能直接升级到这个版本吗？ rev11 单独提取出来
、 可怜的2.9.5终于出现了 能，没有任何问题 ding --------------hao ms 新版出来了 404 link挂了