- 打卡等级：初来乍到
- 打卡总天数：3
- 打卡月天数：3
- 打卡总奖励：38
- 最近打卡：2025-02-08 05:49:14
|
发表于 2021-8-15 22:31:38
|
显示全部楼层
算了，好人做到底。
XBPartitioner is an application that that will format Xbox partitions rewrite the parition table, and
change hard drive cluster sizes.
Note that some users have had issues with F and G drives not being recognized on non-M8
BIOSes. It is recommended to use Chimp to format the drives.
Controls:
Posts Wiki
Original Xbox: Games will never be
the same
r/originalxbox
Join
Search
2021/2/4 xbpartitioner - originalxbox
www.reddit.com/r/originalxbox/wiki/xbpartitioner 2/3
Back: See controls screen. Press Start to go back to the application. Press any other button
to go back to your dashboard.
A: Cycle through preset partition layouts. The presets are:
X Y Z
X Y Z
B: Distribute space evenly to all partitions
X: Change size / start sector
White: Change operation, indicated in the top right corner.
Write & Format: Overwrite the partition table and format your drive. This will erase
any data stored on your hard drive.
Write Only: Overwrite the partition table and not format your data.
Format: Only format your data. This will erase any data stored on your hard drive.
Left Trigger: Increase partition size
Right Trigger: Decrease partition size
D-PAD Left: Increase partition size by 1GB
D-PAD Right: Decrease partition size by 1GB
Left Analog Stick: Change partition size (fine)
Right Analog Stick: Enable/disable current partition
Left+Right Analog Sticks: Undo all changes since last write
Black: Erase partition table from disk
Start: Begin operation. It will ask you to press Y to confirm.
Partitions
The listed partitions are as follows:
1 (E): Game save directory; also used as the default app install location.
2 (C): Operating system directory, do not modify anything here unless you know what
you are doing.
3 (X): Cache drive. It is OK to format this.
4 (Y): Cache drive. It is OK to format this.
5 (Z): Cache drive. It is OK to format this.
6 (F): is an extra storage directory.
7 (G): is an extra storage directory, generally used if your HDD is bigger than 137GB.
8-14 (H, I, J, K, L, M, N, O): are memory cards or USB devices.
Formatting a Large Hard Drive
If you install a new hard drive that is larger than a standard (8GB/10GB) hard drive, whatever you
used to set it up may not show the full capacity of the drive. You can use XBPartitioner to fix this,
or to just reconfigure the sizes of your F and G drives.
Search
2021/2/4 xbpartitioner - originalxbox
www.reddit.com/r/originalxbox/wiki/xbpartitioner 3/3
1.With the new hard drive in, launch XBPartitioner and press A to cycle through the options to
the desired configuration.
1. It is recommended to split the extra hard drive space evenly between the F and G
drive to avoid potential file/folder limits of the filesystem.
2.Ensure that the top right corner says "Write & Format"; if not, press Y until it has this option
selected.
3.For large drives, you will need to format each partition to have these cluster sizes or you will
not be able to access all the space of a partition. Ensure for each partition you highlight, it
follows this scheme:
1. 16KB clusters for up to a 250GB partition
2. 32KB clusters for a 250GB-500GB partition
3. 64KB clusters for a 500GB-1TB partition
4.This step will wipe all data in the F and G drives. Press Start and then Y to confirm. The
new drives should be usable now from your dashboard. If they do not appear, make sure
the F and G drives are enabled in your dashboard's settings or, in the case of a modchip or
TSOP flashed console, try flashing a BIOS that supports F and G drives (6th & 7th partitions).
5.If your new drive size doesn't show up . It seems that running XBPartitioner twice does the
trick, sometimes. (fairly often, actually)
If a drive lists "ER" (error) before the drive size, you will need to format it again, or try
formatting with Chimp. A trick that may work is to format the partitions with the bytes
changed by a small amount, then format it back with the desired amount of bytes.
ADVANCED If you want to make drive E larger, you will have to wipe the F and G partitions if
they exist, using the right thumb button. This allows you to make E a larger size. It has been
said not to go past the default BIOS limitation of 137GB, and this would also make the drive
incompatible with stock BIOS. 120GB should be safe, although making drive E a larger 16
sector size appears to work, and be recognized by BIOSes supporting larger drives.
However, keeping the size of E plus all other default drives under 137GB should retain
compatibility with other BIOSes. Resizing Drive E will also cause drive E to be wiped. You
will need to be sure that your BIOS can boot from drive C. NOT RECOMMENDED if you
have a softmod, and if you haven't tested that your dash you placed on drive C will boot!
And of course back up anything from any drive that will be wiped!
The Cromwell BIOS for Xbox has a hardcoded partition table that expects the E partition to be a
certain size; it will not read partition tables created by XBPartitioner. Having drive E a different
size than the default will cause E to not be recognized by a Linux bootloader with a standard
configuration. This includes the loaders for linux-wrapped apps like Chimp and XMugen. |
|
x 0
狗仔卡
提升卡
置顶卡
变色卡
千斤顶
显身卡
楼主
